Summary
The engraving bit kit contains a selection of small router bits that can be used to engrave intricate designs in wood, plastic, metal and even tiny circuit boards! The kit also includes a 1/8" collet that will be necessary to hold the smaller bits.
Store Description
Work on detailed engravings in wood, plastic, metal and even circuit board wafers! This collection of small bits allow machining of tiny features and intricate designs. The kit includes a special 1/8" collet that will fit the router in your Handibot®. It is all packaged in a special holder that magnetically clips to the back of your Handibot.
Take a look at a recent project creating some jewelry with the Handibot and making custom circuit boards
1/16" Solid Carbide Two Flute Upcut (2 count)
Fewer flutes provide better chip clearance. Bit is center cutting with a 30° helix angle. Mill diameter tolerance is +0.000", –0.002". Square-end end mills allow plunge cuts into a surface.
1/32" Solid Carbide Two Flute Upcut (2 count)
Fewer flutes provide better chip clearance. Bit is center cutting with a 30° helix angle. Mill diameter tolerance is +0.000", –0.002". Square-end end mills allow plunge cuts into a surface.
1/64" Solid Carbide Two Flute Upcut (2 count)
Fewer flutes provide better chip clearance. Bit is center cutting with a 30° helix angle. Mill diameter tolerance is +0.000", –0.002". Square-end end mills allow plunge cuts into a surface.
30 Degree V Engraving Bit
Designed for engraving. The .005 flat tip allows for a cleaner bottom surface.